Finish Fix® – Directions For Use
Finish Fix® Repair & Finish
Test on a small, inconspicuous area first before general application.
Apply when the air temperature is 50-90°F and will remain between those temperatures for 24 hours on the treated surface(s). Drying and recoat times are based on an air temperature of 70°F.
Shake can vigorously for at least 30 seconds. For best results, stir or shake can intermittently.
With a clean, dry, 100% cotton rag, apply a small amount of product to the affected surface(s).
Allow 1-2 minutes for the product to penetrate.
Wipe off excess product with a new clean, dry, 100% cotton rag, following the direction of the surface’s grain, or lengthwise.
Wait 8 hours for the product to dry before recoating.
Allow 24 hours for the product to dry completely before walking on treated flooring.
Place all used rags into a container filled with water (bucket, plastic bag, etc.) and properly dispose of them according to your local authorities and waste disposal service providers.
*Not for use on surfaces that can reach high temperatures, such as a grill hood.
Finish Fix® Cleaner Sealer
Test on a small, inconspicuous area first before general application.
Apply when the air temperature is 50-90°F and will remain between those temperatures for 24 hours on the treated surface(s). Drying and recoat times are based on an air temperature of 70°F.
Shake can vigorously for at least 30 seconds. For best results, stir or shake can intermittently.
With a clean, dry, 100% cotton rag, apply a small amount of product to the affected surface(s).
Use firm pressure to remove dirt, grease, and demarcation from surface(s) and excess liquid in the grain direction or lengthwise. If rag becomes saturated with dirt, flip to clean area of the rag or get a new rag.
With a clean, dry, 100% cotton rag, wipe off excess material right after initial application
Wait 8 hours for the product to dry before recoating.
Allow 24 hours for the product to dry completely before walking on treated flooring.
Place all used rags into a container filled with water (bucket, plastic bag, etc.) and properly dispose of them according to your local authorities and waste disposal service providers.
*Not for use on surfaces that can reach high temperatures, such as a grill hood.
Which Finish Fix® Product Is Right for You?
Both of our products are designed to help you restore, protect, and maintain your surfaces with minimal time, cost, and effort. Here’s a side-by-side look at what each one does best:
Feature / Use Case | Repair & Finish | Cleaner Sealer |
|---|---|---|
| Primary Function | Repairs and restores damaged or faded finishes | Cleans and seals finished surfaces |
| Application Method | Wipe on, Wipe off | Wipe on, Wipe off |
| Surface Prep Required | None | None |
| Dries To Touch | ~2 hours | ~2 hours |
| Time to Recoat | ~8 hours | ~8 hours |
| Works On Clear-Coated Wood | Yes | For heavily soiled surfaces |
| Works On Stained + Clear-Coated Wood | Yes | No |
| Works On Vinyl & LVF | Yes | No |
| Works On Painted Metal Surfaces | Yes (factory-finished only | No |
| Works On Stainless Steel / Brushed Nickel | No | Yes |
| Cleans Grease and Grime | During application | Deep clean focus |
| Seals the Surface | Yes (adds a protective layer) | Yes (as part of restoration) |
| Sheen Enhancing (Buildable Shine) | Yes - add a second or third coat for even more sheen | Yes - with hot and cold rolled steels" Delete painted metals |
| Best For | - Scratched or faded clear coats - Pre-finished wood repairs - Oxidized metal/Interior vinyl surfaces | - Dirty, greasy finished metals - Commercial storefronts, appliances, fixtures - Laminate commercial furnishings - Composite countertops |
| VOC Rating | Zero VOCs | Zero VOCs |
| Skill Level Required | None | None |
Made in the USA. Backed by Professional Experience.
A Product Built by a Pro
Invented by a veteran of the painting and finishing industry with over 35 years of hands-on experience. Eric has restored countless homes featured in Better Homes & Gardens, Colorado Homes & Lifestyles, and other top publications, and has consulted with national paint brands on product development.
Finish Fix reflects his deep knowledge of materials, finishes, and what pros really need on the job site.
Finish Fix® Product Details
- Available in 8 oz bottles,1-quart rectangular, and gallon containers for efficient storage
- Can be shipped without restrictions (non-hazardous)
- Manufactured with quality-control oversight in the USA
- All components sourced from U.S.-based companies
Are you a wholesale retailer or a high volume end user?
Contact us to place a wholesale order: